TM 55-1945-205-24-2
0141 00 3/4 blank
0141 00
INSPECT THE BATTERY
1.
Inspect the battery (2) for wear and cracks. If cracks are found or the outer housing shows excessive wear, the
battery should be replaced.
2.
On battery (2), loosen hex nut (4) on the positive battery lead (5).
3.
Remove positive battery lead (5).
4.
Inspect the battery posts (6), positive battery lead (5) and negative battery lead (7) for excessive buildup of
corrosion. If found, remove corrosion with a soft bristle brush.
5.
Position positive battery lead (5) on battery (2).
6.
Tighten hex nut (4) on the positive battery lead (5).
7.
Install light tower battery negative lead terminal. (WP 0134 00)
END OF WORK PACKAGE
6
2
6
5
4
7
