TM 55-1945-205-24-2
0194 00 2
0194 00
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
NOTE
The following procedure is typical for both removal and installation of light tower wheel
bearings and races.
1.
Remove dust cap (1) from hub (2).
2.
Remove cotter pin (3) from nut (4) and discard.
3.
Remove nut (4) and washer (5) from axel (6).
4.
Remove outer bearing (7).
5.
Remove hub (2) from axle (6).
11
2
5
4
1
3
7
6
