TM 55-1945-205-24-2
0193 00 1
0193 00
UNIT LEVEL MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
LIGHT TOWER RUNNING GEAR WHEEL HUB
REMOVAL AND INSTALLATION
INITIAL SETUP:
Tools
Tool Kit, General Mechanic’s (Rail and Marine) (Item 82, WP 0359 00)
Gloves, Men’s and Women’s (Leather Palm) (Item 27, WP 0359 00)
Goggles, Sun, Wind and Dust (Safety) (Item 29, WP 0359 00)
Helmet, Safety (Brown) (Item 33, WP 0359 00)
Life Preserver, Vest (Item 38, WP 0359 00)
Wrench, Torque (150-750 in. lbs) (Item 91, WP 0359 00)
Materials/Parts
Pin, Cotter
(33968)
PN 35315225
Seal
(33968)
PN 35315142
Personnel Required
Engineer 88L
Equipment Condition
Light Tower Running Gear Wheel and Tire Assembly Removed. (WP 0192 00)
REMOVE LIGHT TOWER RUNNING GEAR WHEEL HUB
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
NOTE
The following procedure is typical for the removal and installation of port and starboard
light tower wheel hubs.
1.
Remove dust cap (1) from hub (2).
