TM 55-1945-205-24-2
0286 00 4
0286 00
d.
Apply a thin second coat of glue from the repair kit to inner bonding surface of the inflatable tube (1).
e.
Apply a thin second coat of glue from the repair kit to the contact surface of inner patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying third coat. Failure to comply could result in a failed patch and
cause damage to equipment.
f.
Allow the glue to dry for 5-10 min. or until tacky.
g.
Apply a thin third coat of glue from the repair kit to inner bonding surface of the inflatable tube (1).
h.
Apply a thin third coat of glue from the repair kit to the contact surface of inner patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying the patch to the inflatable tube. Failure to comply could result
in a failed patch and cause damage to equipment.
i.
Allow the glue to dry for 5-10 min. or until tacky.
14. Insert the inner patch (2) through the tear, lining up one side of the pen mark with one edge of repair.
15. Press one side of the tear to the inner patch (2) first, then the other side.
16. Using a fid, press both lips of the tear firmly together, smoothing thoroughly to remove any air bubbles.
17. Allow 12 hours to dry before testing the inflatable tube (1) for air retention. (WP 0358 00)
18. If repair proves airtight, apply outer patch (3).
WARNING
19. Apply the glue for outer patch (3) application.
a.
Apply a thin first coat of glue from the repair kit to the inner bonding surface of the inflatable tube (1).
b.
Apply a thin first coat of glue from the repair kit to the contact surface of the outer patch (3).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying second coat. Failure to comply could result in a failed patch
and cause damage to equipment.
c.
Allow the glue to dry for 5-10 min. or until tacky.
