INSTALL RHIB ENGINE TEMPERATURE SWITCH

TEST RHIB ENGINE TEMPERATURE SWITCH - TM-55-1945-205-24-2_992

RIGID HULL INFLATABLE BOAT ENGINE AIR SILENCER

TM-55-1945-205-24-2 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility Model (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
848

TM 55-1945-205-24-2 0313 00 5/6 blank 0313 00 WARNING CAUTION Allow oil to cool before removing temperature switch from beaker. Failure to comply may result in injury to personnel. 8. Remove temperature switch (1) from beaker and wipe clean with wiping rag. WARNING 9. Dispose of oil and rags in accordance with local procedures. WARNING 10. Clean up spilled fluid with spill kit and dispose of spill kit waste in accordance with local procedures. INSTALL RHIB ENGINE TEMPERATURE SWITCH 1. Connect wires (5) into connector (2) and remove tags. 1. Install temperature switch (1) in cylinder head (4). 2. Install temperature switch cover (3) into cylinder head (4). 3. Connect wiring connector (2) to temperature switch (1). 4. Install RHIB engine cover. (WP 0297 00) 5. Install RHIB battery negative lead terminal. (WP 0336 00) 6. Perform operational check of RHIB. (TM 55-1945-205-10-2) END OF WORK PACKAGE

Privacy Statement
Press Release
Contact