TM 55-1945-205-24-4
0153 00 2
0153 00
2.
Remove retainer ring (3) from reflector (4).
3.
Remove lens (5).
4.
Remove lamp support (6).
5.
Unscrew lamp (7) from socket (8) and discard defective lamp (7).
INSTALL LIGHT TOWER BULBS
CAUTION
Clean cotton gloves must be worn when installing lamps. Failure to comply will
result in damage to lamps.
1.
Carefully screw new lamp (7) into socket (8).
2.
Install lamp support (6).
3.
Install lens (5).
4.
Install retainer ring (3) on reflector (4).
5.
Install nut (2) on bolt (1) and tighten nut (2).
6.
Install light tower battery negative lead terminal. (WP 0131 00)
END OF WORK PACKAGE
1
2
3
5
7
4
8
6
