TM 55-1945-205-24-4
0191 00 2
0191 00
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during FC operations and maintenance. Failure to observe these precautions could
result in serious injury or death.
NOTE
The following procedure is typical for both removal and installation of light tower wheel
bearings and races.
1.
Remove dust cap (1) from hub (2).
2.
Remove cotter pin (3) from nut (4) and discard.
3.
Remove nut (4) and washer (5) from axle (6).
4.
Remove outer bearing (7).
5.
Remove hub (2) from axle (6).
11
2
5
4
1
3
7
6
