TM 55-1945-205-24-4
0229 00 1
0229 00
DIRECT SUPPORT MAINTENANCE
FLOATING CAUSEWAY
LIGHT TOWER DOOR LATCH
REPLACEMENT
INITIAL SETUP:
Tools
Tool Kit, General Mechanics (Item 53, WP 0253 00)
Gloves, Mens and Womens (Leather Palm) (Item 16, WP 0253 00)
Goggles, Sun, Wind and Dust (Safety) (Item 18, WP 0253 00)
Helmet, Safety (Brown) (Item 20, WP 0253 00)
Life Preserver, Vest (Item 25, WP 0253 00)
Compressor, Unit, Reciprocating, Power Drive (Item 8, WP 0253 00)
Bar, Bucking (Item 2, WP 0253 00)
Drill, Electric, Portable (Item 11, WP 0253 00)
Drill Set, Twist (Item 10, WP 0253 00)
Hammer, Pneumatic, Portable (Rivet Gun) (Item 19, WP 0253 00)
Materials/Parts
Latch, Door
(33968)
PN 36793602
Rivet
(33968)
PN 36794816
Qty 4
Personnel Required
Engineer 88L (2)
Equipment Condition
Light Tower Battery Negative Lead Terminal Removed. (WP 0131 00)
REMOVE LIGHT TOWER DOOR LATCH
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during FC operations and maintenance. Failure to observe these precautions could
result in serious injury or death.
NOTE
The following procedure is typical for the removal and installation of port and starboard light
tower door latches.
1.
Drill out four rivets (1) from door latch (2) using a drill and twist drill. Discard rivets (1).