TM 55-1945-205-24-4
0234 00 3/4 blank
0234 00
CLEAN ONSHORE ANCHOR
WARNING
1.
Using wiping rags soaked with cleaner, remove debris from all components.
WARNING
2.
Using clean water, remove cleaner residue from all components.
3.
Air dry all components.
WARNING
4.
Dispose of contaminated rags in accordance with local procedures.
INSPECT ONSHORE ANCHOR
1.
Inspect all components for cracks and breaks. Replace damaged items.
2.
Inspect threaded components for damaged threads. Replace damaged items.
ASSEMBLE ONSHORE ANCHOR
1.
Position anchor shank (11) in fluke assembly (10).
2.
Install hex bolt (8) through fluke assembly (10) and anchor shank (11).
3.
Install hex nut (9) on hex bolt (8). Tighten nut (9).
4.
Install new cotter pin (7) in end of hex bolt (8) and bend ends over with pliers.
5.
Install shackle (6) and bolt (5) on bottom of fluke assembly (10).
6.
Install shackle (4) and bolt (3) on end of anchor shank (11).
7.
Install aluminum wedge (1) in anchor (2).
END OF WORK PACKAGE
