TM 55-1945-205-24-40235 00 30235 00CLEAN ONSHORE ANCHOR SNATCH BLOCKWARNINGNOTEUse fresh water to thoroughly wash all equipment exposed to salt water or salt spray.1.Clean snatch block (5) and shackle (1) with cleaner and wire brush.2.Wipe all parts clean with wiping rags.WARNING3.Dispose of contaminated wiping rags in accordance with local procedures.INSPECT ONSHORE ANCHOR SNATCH BLOCK1.Inspect sheave (8) and bushing (9) for cracks, deterioration, pitting or wear. Replace damaged parts.2.Inspect shackle (1) for damaged threads. Replace damaged parts.INSTALL ONSHORE ANCHOR SNATCH BLOCK1.Install sheave (8) and bushing (9) in center of snatch block (5).a.Install bushing (9) inside sheave (8).b.Position sheave (8) and bushing (9) in center of snatch block (5).c.Install pin (11) through snatch block (5), sheave (8) and bushing (9).d.Install nut (10) on pin (11). 2.Install yoke (2) on top of snatch block (5).a.Position yoke (2) in snatch block (5).b.Install pin (7) through snatch block (5) and yoke (2).c.Install nut (6) on pin (7).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business