• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
MAST WIRING HARNESS REPLACEMENT INSTRUCTIONS - LOWER (cont) - TM-5-1940-277-34_149
MAST WIRING HARNESS REPLACEMENT INSTRUCTIONS - LOWER (cont) - TM-5-1940-277-34_151

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  128    129    130    131    132  133  134    135    136    137    138  
TM 5-1940-277-34 MAST WIRING HARNESS REPLACEMENT INSTRUCTIONS - LOWER (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Lower mast (1) a. Light sockets Remove. Reference TM (2) (naviga- 5-1940-277-20. tion) b. Spiral wrap Remove all that Wraps around (3) on wires is exposed. wire.  Unwind and retain. c. Socket (4) Unscrew plug Disconnects and plug (5) from socket. upper mast harness from lower mast harness. d. Socket Remove screw Use screwdriver. retaining from side of Frees socket to screw (6) and socket housing be pulled out of washer (7) (8). housing. e. Socket core Pull out of (9) socket housing (8). NOTE Before  next  step  check  wire  color  leading  to  each  pin.    Pin  numbers  are  on  face  of  socket  and should be:  1 Blue, 2 Black, 3 Brown, 4 - Green.  If not, make diagram of connections. f. 4 wire Loosen and pull Use screwdriver. retaining wires out. Lay core aside screws (10) for reuse. NOTE Next step applies to point where wires enter mast frame. 2-123







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.