GENERATOR AIR INTAKE TUBE ASSEMBLY REPLACEMENT (Sheet 3 of 3)
Install tube (A) to generator (B) and angle brackets (C) on engine.
Install two flat washers (D), new lockwashers (E), and bolts (F) to brackets (C).
Using socket, tighten bolts (F) to tube (A).
Install clamp (G) to tube (A).
Install clamp (H) to elbow (J).
Install hose (K) to tube (A).
Install assembled elbow (L) to hose (K).
Move clamps (G) and (H) onto hose (K).
Using flat-tip screwdriver, tighten clamps (G) and (H).
End of Task