HOSE ASSEMBLY (PRIMARY FUEL FILTER TO BACKFLOW VALVE) REPLACEMENT (Sheet 1 of 2)
TOOLS: 7/8 in. combination box and open end wrench
SPECIAL TOOLS: Ground hop kit (Item 30, Chapter 3, Section I)
Rags (Item 12, Appendix D)
Sealing compound (Item 27, Appendix D)
Using 7/8 inch wrench, disconnect
nuts (A) of hose assembly (B).
Remove hose assembly (B).
CLEANING AND INSPECTION:
Inspect for breaks, cracks, and
damaged fittings. If defective,
replace hose assembly.
Go on to Sheet 2