BRAKE CONTROL HOUSING REPAIR (Sheet 6 of 14)
Using 15/16 inch wrench, remove plug
Using 9/16 inch socket with extension,
Shims are Iocated between
housing assembly (AL) and
transmission on bolts (AQ
and AR), be careful when
removing control housing so as
not to lose shims.
Using 15/16 inch socket and extension,
remove three bolts and packings (AQ)
(under head) and bolt (AR). Throw packings
Remove housing assembly (AL) and shims
Remove two packings (AT) and shims
(AU). Throw packings away.
Using 9/16 inch deep well socket, remove
two studs (AV).
Using 3/4 inch socket, remove four spacer
Remove gasket (AX). Throw gasket
Remove stud (AY) and eight studs (AZ).
Go on to Sheet 7