TM 5-5420-228-24
SCISSORS CYLINDER HOSE ASSEMBLIES (CF1, CF2, CG, CI, AND CJ) AND HYDRAULICS
REPLACEMENT (Sheet 9 of 12)
NOTE
Collar marked "CF1" goes on left side. Collar
marked "CF2" goes on right side.
18.
Holding elbow (H) with 12 inch adjustable
wrench, use other 12 inch adjustable wrench to
install elbow (V) and collar "CF2" (W).
19.
Holding elbow (V) with 12 inch adjustable
wrench, use other 12 inch adjustable wrench to
install elbow (X).
20.
Repeat steps 1 through 19 for left side.
21.
Holding elbow (X) with 12 inch adjustable
wrench, use 1-1/4 inch wrench to install
hose assemblies "CF2" (Y) on elbow (X).
Manually position relief valve "RV8" (P) and
22.
attached parts between mounting brackets.
23.
Manually install elbow (Z) and collar "CF2"
(AA), in relief valve (P).
Install adapter (AB) and collar "CJ" (AC)
24.
in bushing (U).
Holding relief valve "RV8" (P) with 15 inch
25.
adjustable wrench, use 12 inch adjustable
wrench to tighten elbow (Z).
Holding bushing (U) with 1-3/8 inch wrench, use 1-1/8 inch wrench to tighten adapter (AB).
26.
Holding elbow (Z) with 12 inch adjustable wrench, use 1-1/4 inch wrench to install hose
27.
assembly "CF2" (Y) on elbow (Z).
Holding elbow (Q) with 12 inch adjustable wrench, use 1-1/8 inch wrench to install adapter
28.
(AD) and collar "CG" (AE) onto elbow (Q).
29.
Holding adapter (AD) with 1-1/8 inch wrench, use 1-1/4 inch wrench to install hose
assembly "CG" (AF) on adapter (AD).
TA251545
Go on to Sheet 10
3-147