TM 5-5420-228-24
DRIVER'S HATCH NIGHT VIEWER LATCH REPAIR (Sheet 8 of 10)
With one person relieving load with punch,
17.
remove drill bit and handle (M).
Place spacer (Q) and handle (M) on shaft (F).
18.
19.
Using hammer, drive pin (R) into retaining hole
of handle (M) and shaft (F).
Remove punch
20.
21. Release lever (K) and Push handle (M) forward
1/2 turn to locked position. Release and return
to position shown.
NOTE
Handle should lock in both forward and aft positions and
should not bind during movement.
22. Remove assembled parts from vise.
Go on to Sheet 9
TA251774
3-277
