UNLOADING BAP TO GROUND (Contd)
If BAP is loaded, ensure front pin lock assemblies are up
and their jaws closed, and rear guides are locked in the
MID position at both sides of BAP. Failure to comply may
result in possible loss of bay or rollover of transporter,
causing damage to equipment and possible injury or
death to personnel.
Perform steps i and j if bay is loaded on BAP.
i. Rotate handle (2) until rear guide (1) is disengaged and move rear guide (1)
inboard or outboard until locked in MID position at both sides of BAP.
j. Position both front pin lock assemblies (4) in UP position, and ensure
jaws (3) are locked.