3.14.6 Stowing the Crane Stabilizer Legs
OPERATION OF EQUIPMENT POWERED BY HYDRAULIC
PRESSURE IS HAZARDOUS. KEEP CLEAR OF MOVING PARTS.
EXPOSURE TO HYDRAULIC FLUID UNDER PRESSURE IS
HAZARDOUS. IN THE EVENT OF A HOSE OR COMPONENT FAILURE, REMOVE ALL FLUID
CONTAMINATION FROM THE SKIN AND EYES WITH CLEAN WATER AND SEEK MEDICAL
CRUSH HAZARD. ENSURE THAT THE AREA WITHIN THE CRANE WORKING AREA IS CLEAR
OF PERSONNEL. FAILURE TO HEED THIS INSTRUCTION COULD LEAD TO DEATH OR
SEVERE INJURY TO PERSONNEL.
Crane Stabilizer Leg Controls
Move the crane to stabilizer lever (1) from crane (B) to stabilizer (A).
Operate the crane stabilizer controls
adjacent to both stabilizers and retract both
If the crane stabilizer leg extension has been used retract the crane stabilizer leg so that
item (9) is just above the ground.
Support the weight of item (9) with handle and remove clip (4) and pin (5).
Push item (3) up into the crane stabilizer leg carefully until pin (4) can be inserted into the
hole next to item (9).
Secure pin (4) with clip (5).
Continue to recover crane stabilizer leg as normal 188.8.131.52 through 184.108.40.206.