TM 5-1940-277-34
STARTER MOTOR REPAIR INSTRUCTIONS
This task covers:
a. Disassembly
b.
Inspection
c.
Test
d.
Repair
e.
Assembly
INITIAL SETUP
Tools:
Equipment Condition:
Condition Description:
Blind riveter
TM 5-1940-277-20
Starter motor removed
Hammer, ball peen
from engine.
Drift pin
Punch
Ratchet
5/16 in socket
13/16 in socket
Flat tip screwdriver, 6 in
1-1/8 in box wrench
Snap ring pliers
Non-metallic hammer
Long nose pliers
Vise
Vise Jaw caps
13/16 in box wrench
1/2 in open end wrench
Honing stone
Cross tip screwdriver
Armature test set
Materials/Parts:
Multimeter
Generator, alternator and
Lubricator core plugs, drive end
starter test stand
shield (1 each small, 2 each large)
Feeler gage
Snap ring
Press
Blind rivet
Micrometer calipers, inside
Solvent
Bottle brush
Engine oil
Lathe
Lapping paste
Air compressor
Fine sandpaper
Air blow gun
Parafin
Spring tester, resiliency
Brushes (set)
Torque wrench (0 - 175 ft-lb)
Grease
Safety goggles
Crocus cloth
2-191
