TM 5-1940-277-34
TRANSMISSION REPAIR INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
27. Transmission case
a. Bearing
Smear with petro-
Arbor press must
(47)
retainer
leum jelly and
be raised.
gasket (44)
position on case.
b. Bearing
Position over
retainer (41)
bearing (46).
28. Bearing retainer
6 lockwashers
Install and
(41)
(43) and 6
torque to 42 -
bolts (42)
50 ft-lb.
29. Pinion cage and
a. Coupling (40)
a. Lubricate all
output shaft (38)
surfaces with
clean engine
oil.
b. Assemble
splined por-
tion of coup-
onto splined
portion of out-
put shaft by
hand as far as
possible.
c. Gently press
Use arbor press.
coupling onto
shaft until
contact with
bearing inner
race is made.
NOTE
Case with pinion cage and output shaft assembly may now be removed from arbor press table.
Coupling flange should be clamped in vise to secure it for next step.
3-127