TM 5-1940-322-24
0040 00
INSTRUMENT PANEL INDICATOR LIGHT REPLACEMENT (Contd)
CAUTION
Ensure instrument panel is supported during removal and
installation. Failure to comply may result in damage to equipment.
NOTE
All indicator lights on the instrument panel are
replaced the same way. This procedure covers replacement of
one indicator light.
Tag all wires during removal to assist with installation.
REMOVAL
CAUTION
Use caution when removing instrument panel from control console.
Failure to comply may result in damage to equipment.
1.
Remove six screws (5) and instrument panel (6) from control console (7).
2.
Disconnect electrical connector (1) from electrical connector (2).
3.
Disconnect two lead wires (3) from electrical connector (2).
4.
Remove indicator light (4) from instrument panel (6).
INSTALLATION
1.
Apply thin coat of adhesive under shoulder of indicator light (4).
2.
Install indicator light (4) in instrument panel (6).
3.
Connect lead wires (3) to electrical connector (2).
4.
Connect electrical connector (1) to electrical connector (2).
5.
Install instrument panel (6) on console (7) with six screws (5).
6.
Connect battery ground cables (WP 0054 00).
7.
Close battery hatch (TM 5-1940-322-10).
0040 00-2
