TM 5-1940-322-24
0047 00
AUXILIARY SWITCH PANEL TO JUNCTION BOX WIRING HARNESS REPLACEMENT (Contd)
CAUTION
Ensure auxiliary switch panel is supported during removal and
installation. Failure to comply may result in damage to wiring.
NOTE
Tag all lead wires and cables during removal to assist with
installation. Additionally, tag junction box wire locations for easier
identification.
REMOVAL
1.
Remove fourteen screws (3) and auxiliary switch panel (2) from console (1).
2.
Remove two junction connectors (7) and (11) and grommets (6) and (12) from access panel (4).
CAUTION
Use caution when removing access panel from auxiliary switch
panel. Failure to comply may result in damage to wiring.
3.
Remove eight screws (5) and access panel (4) from auxiliary switch panel (2).
4.
Remove six screws (14), lead wires (15) (nos. 1 through 6), harness wires (16), and switch wires (17)
from auxiliary switch panel (2).
5.
Repeat step 4 for remaining side of auxiliary switch panel (2) (nos. 7 through 12).
6.
Remove screw (18), washer (19), nut (21), and cables (10) and (13) from bracket (22).
7.
Remove screw (18), washer (19), nut (21), cables (10) and (20), and bracket (22) from access panel (4).
8.
Remove harnesses (8) and (9) and cables (10) from access panel (4).
0047 00-2
