TM 5-1940-322-24
0047 00
AUXILIARY SWITCH PANEL TO JUNCTION BOX WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
16.
Install cables (10) and harnesses (8) and (9) through access panel (4).
17.
Install bracket (22) on access panel (4) with screw (18), washer (19), cables (10) and (20), and nut (21).
18.
Install cables (10) and (13) on bracket (22) with screw (18), washer (19), and nut (21).
NOTE
Perform steps 19 and 20 if installing a new auxiliary switch panel.
19.
Remove six screws (14), lead wires (15) (nos. 1 through 6), and switch wires (17) from auxiliary switch
panel (2).
20.
Repeat step 19 for remaining side of auxiliary switch panel (2).
21.
Install six switch wires (17), harness wires (16), and lead wires (15) (nos. 1 through 6) on auxiliary
switch panel (2) with screws (14).
22.
Repeat step 6 for remaining side of auxiliary switch panel (2) (nos. 7 through 12).
23.
Install access panel (4) on auxiliary switch panel (2) with eight screws (5).
24.
Install two grommets (6) and (12) and junction connectors (7) and (11) on access panel (4).
25.
Install auxiliary switch panel (2) on console (1) with fourteen screws (3).
26.
Install battery ground cable (WP 0054 00).
27.
Close battery hatch (TM 5-1940-322-10).
0047 00-6
