TM 5-1940-322-24
0106 00
TURBOCHARGER PLUMBING MAINTENANCE (Contd)
INSTALLATION
1.
Apply thin coat of sealing compound on male threads of coolant supply hose (6), oil supply hose (4),
and elbow adapter (5).
2.
Install oil drain hose (33) on fitting (32) with clamp (17).
3.
Install oil drain tube (15) on oil drain hose (33) with clamp (17).
4.
Install oil drain hose (16) on oil drain tube (15) and turbocharger oil drain (14) with two clamps (17).
5.
Install adapter (34) and new sealing washer (9) on turbocharger (7).
6.
Install elbow (5) on adapter (34).
7.
Install coolant vent hose (6) on elbow (5) and header tank (31).
8.
Install oil supply hose (4) on oil filter housing (30).
9.
Secure oil supply hose (4) and coolant vent hose (6) on engine (26) with two clamps (28) and screws (29).
10.
Install oil supply hose (4) on turbocharger fitting (8).
11.
Install vent tube (24) on engine (26) with screw (23) and new gasket (25).
12.
Install vent hose (12) on vent tube (24) and banjo fitting (10) with two clamps (11).
13.
Install banjo fitting (10) on turbocharger (7) with two new sealing washers (9) and banjo bolt (13).
14.
Install air crossover hose (22) and air crossover tube (1) on intake manifold (27) with two clamps (3).
15.
Install air crossover hose (2) and air crossover tube (1) on turbocharger outlet (21) with two clamps (3).
16.
Install air filter (20) on turbocharger inlet (18) with clamp (19).
17.
Fill cooling system (WP 0012 00).
18.
Start engine and check for leaks (TM 5-1940-322-10).
19.
Install aft cockpit (WP 0016 00).
20.
Close engine hatches (TM 5-1940-322-10).
0106 00-4
