TM 5-1940-322-24
0120 00
TRANSMISSION ADAPTER PLATE REPLACEMENT (Contd)
NOTE
Both transmission adapter plates are replaced the same way. This
procedure covers the replacement of one transmission adapter
plate.
REMOVAL
CAUTION
Ensure transmission adapter plate is supported during removal.
Failure to comply may result in damage to equipment.
Remove seven screws (4), washers (3), and transmission adapter plate (1) from transmission housing (2).
INSTALLATION
1.
Apply light coat of sealing compound to threads of screws (4).
2.
Install transmission adapter plate (1) on transmission housing (2) with seven washers (3) and
screws (4). Tighten screws (4) to 50 lb-ft (68 Nm).
3.
Install transmission (WP 0125 00).
2
1
3
4
3
4
END OF WORK PACKAGE
0120 00-2
