TM 5-1940-322-24
0121 00
TRANSMISSION DRIVEPLATE REPLACEMENT (Contd)
NOTE
Both transmission driveplates are replaced the same way. This
procedure covers the replacement of one transmission driveplate.
REMOVAL
Remove eight screws (4), lockwashers (3), and transmission drive plate (2) from engine flywheel (1). Discard
lockwashers (3).
INSTALLATION
1.
Apply light coat of sealing compound to threads of screws (4).
2.
Install transmission driveplate (2) on engine flywheel (1) with eight new lockwashers (3) and
screws (4). Tighten screws (4) to 35 lb-ft (47 Nm).
3.
Install transmission (WP 0125 00).
1
2
3
4
END OF WORK PACKAGE
0121 00-2
