TM 5-5420-202-20-2
TRANSMISSION OIL COOLER REPLACEMENT (Sheet 2 of 10)
NOTE
Removal procedures are the same for the right and left
coolers except that the upper rear mount bolt on the right
cooler also secures support bracket (A).
REMOVAL:
1.
Using screwdriver, loosen clamp (B) to
remove air inlet hose (C). Remove air
inlet hose (C).
2.
Place cover over air inlet port to keep
out dirt.
Place drip pan or rags under transmission
3.
adapters (D).
NOTE
It may be necessary to hold adapters
(C and D) with 1-5/8 inch wrench
while removing tube fittings (A and
B).
4.
Using 1-1/2 inch wrench, remove tube (E)
at transmission adapters (D).
5.
Using 1-1/2 inch wrench, remove tube (F)
at transmission adapters (D).
Go on to Sheet 3
6-39
