TM
5-5420-202-20-2
AIR CLEANER OUTLET ELBOW REPLACEMENT (Sheet 1 of 2)
9/1 6 in. socket with 1/2 in. drive
TOOLS:
Ratchet with 1/2 in. drive
Torque wrench with 1/2 in. drive
(0-175 lb-ft) (0-237 NZm)
10 in. extension with 1/2 in. drive
Pry bar
9/16 in. combination box and open end wrench
Universal joint with 1/2 in. drive
Gasket
SUPPLIES:
Self-locking nuts (14 required)
Remove air cleaner (page 7-88)
PRELIMINARY
PROCEDURES:
Remove restriction indicator (page 7-87)
NOTE
Removal of left or right outlet elbow is the same. Left side shown.
REMOVAL:
Using socket and wrench, remove 14 nuts (A).
1.
2.
Using pry bar, loosen elbow (B) from air
cleaner.
Remove elbow (B) and gasket (C). Throw
3.
gasket away.
4.
Inspect studs for damaged threads and for
stamping of H on ends. If threads are damaged
or ends are not stamped with H, replace studs.
Go on to Sheet 2
Change 1