TM 5-5420-202-20-2
FUEL TANK CONDENSATE REMOVAL (Sheet 5 of 6)
4.
Operate pump handle (E) several times
to drain any fuel left in hoses (D) and
(F) and hand fuel pump (G).
5.
Remove discharge hose (F) from 55
gallon drum (H), and let hose hang
over side of tank.
6.
Using fingers in clamp rings (J), pull
clamps (K) out and down to loosen dis-
charge connector (L).
Remove discharge hose (E)
7.
from pump discharge connector
(L).
8.
Repeat steps 6 and 7 for removal of
suction hose.
9. Install dust cover (M) on discharge con-
nector (L).
10.
Using fingers in clamp rings (J), pull
clamps (K) out and up against dust
cover (M) to clamp dust cover in place.
11.
Repeat steps 9 and 10 for installing
dust cover on hand fuel pump suction
connector and hoses.
Go on to Sheet 6
7-182