TM 5-5420-202-20-2
MANIFOLD HEATER FUEL FILTER AND INPUT FUEL LINE REPLACEMENT (Sheet 3 of 8)
Fuel Filter Replacement (Sheet 3 of 5)
Using 5/16 inch open end wrench, remove two
bolts and washers (G) securing solenoid valve (B)
to bracket.
Using screwdriver, remove two screws, lock-
washers, and flat washers (H) securing
fuel filter (J) to bracket.
Remove solenoid valve (B), fuel filter (J), and attached fittings as a unit.
6.
NOTE
It may be necessary to place fuel filter in a vise.
Using 7/16 inch open end wrench, hold nipple (K) and remove fuel filter (J) from nipple.
7.
8.
Using 1/2 inch open end wrench, remove adapter (L) from fuel filter (J).
Inspect hoses, tube assemblies, and fittings for cracks and other damage.
9.
TA248371
Go on to Sheet 4
7-247