TM 5-5420-202-20-2
MANIFOLD HEATER FUEL RETURN TUBE ASSEMBLY REPLACEMENT (LEFT AND RIGHT
BANK) (Sheet 6 of 7)
4.
Using 9/16 inch wrench, install coupling
(F) on elbow(G).
5.
Using 9/16 inch wrench on elbow
(G)
and
adjustable wrench on tee (H), install
elbow (G) on tee (H).
Using 1/2 inch wrench, install coupling
6.
(F), elbow (G), and tee (H) to solenoid
valve (J).
Using 9/16 inch wrench, install line nut
7.
of tube assembly (K) on tee (H).
8.
Using 9/16 inch wrench, install line nut
of tube assembly (C) on tee (H).
Position solenoid valve (J) on bracket (L).
9.
Using 5/16 inch wrench, install two
10.
screws and washers (M) through bracket
(L) and into solenoid valve (J).
11.
Using fingers, install grommet (E) in slot
of lower engine cooling fan shroud (N).
Using both hands, install lower engine
12.
cooling fan shroud (N) over mounting
holes in engine bulkhead.
13.
Using hands, manually install four screws
and washers (P) in lower engine cooling
fan shroud (N).
14.
Using socket and 1/2 inch wrench,
tighten four screws and washers (P) in
lower engine cooling fan shroud (N).
TA248395
Go on to Sheet 7
7-271