TM 5-5420-202-20-2
EXHAUST PIPE (RIGHT SIDE) REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using adjustable wrench to hold elbow
(A), use 7/8 inch wrench and loosen
fitting (B).
2.
Using hammer, tap elbow (A) and lift
tube (C) from exhaust pipe.
Using 9/1 6 inch socket and open end
3.
wrench, remove six nuts (D) holding
exhaust pipe (E) to turbosupercharger
housing (F). Remove exhaust pipe (E)
with insulation halves (G) and gasket
(H) from turbosupercharger housing
(F). Throw gasket (H) away.
Using cross-tip screwdriver and
4.
5/16 inch wrench, remove 14 screws
(J), each with two flat washers
(K), one lockwasher (L), and one
nut (M) holding insulation halves
(G) to exhaust pipe (E).
U s i n g flat-tip screwdriver, remove
5 *
clamp (N) from packing (P). Remove
packing (P) from pipe (E).
6.
Remove insulation halves (G) from
exhaust pipe (E).
Go on to Sheet 3
8-10