TM
5-5420-202-20-2
CAP ASSEMBLY REPLACEMENT (Sheet 2 of 3)
Using wrench to hold nut (D), use 1/2 inch
2.
socket and remove screw (E) securing
clamp (F). Discard nut (D).
Remove clamp (F) from cap assembly (G).
3.
Using 7/16 inch socket, remove screw (H)
4.
and lockwasher (J) securing cap assembly
(G).
Using 1/2 inch socket, remove screw (K)
5.
and lockwasher (L) securing cap assembly
[G).
Remove cap assembly (G) and gasket (M).
6.
Discard gasket.
Inspect bracket (N) for damage. If damaged and replacement is required, using 1/2 inch
7.
socket, remove two screws (P) securing bracket and remove bracket.
Go on to Sheet 3
8-15
Change 1
