TM 5-5420-202-20-3
STARTER REPLACEMENT (Sheet 3 of 7)
6. Using 1/2-inch wrench, loosen two
self-locking nuts (Q) securing U-bolt
(R) to cradle assembly (S).
7. Using 1/2 inch socket and extension,
remove four screws (T) and lockwashers
(U) securing relay solenoid bracket to
engine oil pan. Remove relay bracket.
8.
Using pliers, cut and remove lockwire (V) on
four screws (W) securing starter cradle
assembly (S) and bracket (X) to engine oil
pan.
Using 9/16-inch socket and extension, remove
9.
screw (Y) and ground strap (Z) from starter
cradle assembly (S).
10. Using 9/16-inch socket and extension, remove
three screws and flat washers (W) securing
starter cradle assembly (S) and bracket (X)
to engine oil pan. Remove starter cradle
bracket and U-bolt as assembly.
TA248964
Go on to Sheet 4
10-23