TM 5-5420-202-20-3
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 2 of 23)
Engine Oil Pressure Indicator Replacement (Sheet 1 of 2)
TOOLS:
3/8 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
PRELIMINARY PROCEDURE: Remove instrument panel from vehicle (page 10-111)
REMOVAL:
1. Remove two leads (circuits 27 and 36 from rear of indicator (A) by pulling out.
2. Using wrench, remove two nuts (B) and
lockwashers (C) securing indicator (A)
and mounting bracket (D) to panel.
3. Remove indicator (A), mounting bracket
(D), and bezel (E).
TA249056
Go on to Sheet 2