TM 5-5420-202-20-3
HEADLIGHT GUARD REPLACEMENT (Sheet 1 of 1)
TOOLS: Ratchet with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
3/4 in. combination box and open end wrench
SUPPLIES:
Lockwashers (2 required)
REMOVAL:
1. Using 9/16 inch socket, remove two screws (A) and washers (B) holding headlight guard
to outrigger No. 1 (C).
2.
Using 3/4 inch socket on screws (D) and 3/4 inch wrench on nuts (E), remove two screws
(D) and washers (F) and two nuts (E) and lockwashers (G) holding headlight guard (H)
to hull (J).
3.
INS
1.
Using 9/16 inch socket, loosely install headlight guard (H) to hull using two screws (A)
and washers (B).
2.
Using 3/4 inch socket and 3/4 inch wrench,
loosely install headlight guard (H) to hull
using two screws (D), washers (F), new lock-
washers (G), and nuts (E).
3.
Using 9/16 inch socket on screws (A) and 3/4
inch socket and 3/4 inch wrench on screws (D)
and nuts (E), tighten screws and nuts.
End of Task
TA249126
