TM 5-5420-202-20-3
HEADLIGHTS STOWAGE LAMP HOLDER REPLACEMENT (Sheet 1 of 1)
TOOLS: 7/16 in. combination box and open end wrench
Lockwashers (3 required)
SUPPLIES:
NOTE
T h e r e are two lampholders in the
Removal and
c r e w compartment,
i n s t a l l a t i o n are the same for each
lampholder.
REMOVAL:
1.
Using hand, remove dust cap (A) by turning
counter clockwise.
2.
Using wrench, remove three screws (B),
lockwashers (C), and flat washers (D).
3.
Remove lampholder (E).
INSTALLATION:
1.
Place lampholder (E) in position.
Using wrench install three screws (B),
2.
lockwashers (C), and flat washer (D).
3.
Install dust cap (A) by turning clockwise.
End of Task.
TA249128