TM 5-5420-202-20-3
ENGINE WIRING HARNESS REPLACEMENT (Sheet 6 of 12)
39.
Using slip joint pliers, remove
electrical connector (AZ) from
ignition unit (BA).
Using 7/16 inch socket, remove two
40.
screws and lockwashers (BB) securing
clamp (BC).
4 1 . Remove clamp.
42.
Using 1/2 inch socket, remove nut (BD)
securing clamp (hidden).
43.
Remove clamp.
44.
Using 1/2 inch socket with extension,
remove screw and lockwasher (BE) secur-
ing clamp (BF).
Remove clamp (BF).
45.
Using spanner wrench, disconnect
46.
electrical connector (BG) from low
voltage protection relay (BH).
Using cutting pliers, cut and remove
47.
two plastic straps (BJ) from cables (BK).
Using 3/4 inch wrench, remove nut and
48.
lockwasher (BL).
Remove three cables (BK).
49.
Using flat-tip screwdriver, remove
50.
screw (BM).
Remove electrical cable (BN).
51.
Remove engine wiring harness from
52.
engine.
TA249232
Go on to Sheet 7
10-291
