TM 5-5420-202-20-3
BRAKE MASTER CYLINDER REPLACEMENT (Sheet 5 of 9)
CLEANING AND INSPECTION:
1.
Inspect stoplight switch (A). Replace
if unserviceable.
Cleaning agent specified is flammable. Use only in well ventilated areas.
Keep away from flames, sparks, or heat. Do not smoke while using. Prevent
contact with eyes, mouth, and/or skin. Wear rubber gloves when perform ing
cleaning procedures.
2.
Using clean rags and dry cleaning solvent,
clean all parts which have been removed.
3.
Inspect elbow (B), brake tube assembly (C),
tube reducers (D), line tube nuts (E),
and push rod (F) for damage, bad threads,
cracks, or excessive wear. Replace if
unserviceable.
4.
Using flat-tip screwdriver, clean groove (G)
on push rod (F). Remove all old adhesive.
Go on to Sheet 6
TA249396