TM 5-5420-202-20-3
TRACK ASSEMBLY REPLACEMENT (Sheet 2 of 10)
NOTE
Disconnect track up front between
wheel and
compensating
idler
roadwheel at position No. 1 (on
either side).
REMOVAL:
1.
Using 15/16 inch socket with ratchet,
loosen bolt (A) securing wedge (B) to end
connector (C).
2.
Using hammer, tap wedge (B) to loosen
it.
3.
Remove bolt and wedge. Throw both
parts away.
4.
Repeat steps 1 thru 3 to remove bolt and
wedge at opposite side of track.
5.
Put hook (D) of track end connector puller and
pump behind end connector (C).
6.
Aline studs (E) of puller with shoe pins
(F).
7.
Pump handle (G) until gap between end
connector (C) and track shoes (H) is about
1 inch.
Go on to Sheet 3
14-80
Change 4