TM 5-5420-202-20-3
STEERING CONTROL HANDLE, MOUNT AND SLEEVE REPLACEMENT (Sheet 1 of 2)
TOOLS: 9/16 in. open end wrench
Hammer
1/8 in. drive punch
Slip joint pliers
Snapring pliers
SUPPLIES:
Lockwashers (4 required)
REMOVAL:
QUADRANTS REMOVED
FOR CLARITY
1.
Using wrench, remove bolt (A) from
clevis of handle (B).
Push rod (C) to one side.
2.
3.
Using slip joint pliers, remove cotter
pin (D) from straight pin (E).
4.
Using hammer and punch, remove straight
pin (E) from handle (B).
Remove handle (B) from vehicle.
5.
6.
Using snapring pliers, remove retaining ring (F). Remove sleeve (G) from mount (H).
7.
Using wrench, remove four screws (J) and lockwashers (K). Remove mount (H).
TA249627
Go on to Sheet 2