TM 5-5420-202-20-3
FENDER AND SHIELD (REAR) REPLACEMENT (Sheet 3 of 7)
Using 1-inch socket, remove four screws and lockwashers (R) holding support No. 5 (H) on
6.
vehicle. Remove support No. 5 (H).
7.
Using 9/16 inch socket on screw (S) and 9/16 inch wrench on locknut (T), remove three
screws (S), nuts (T), and washers (U) holding shield (V) to fender (E). Remove shield (V)
from fender (E).
Go on to Sheet 4
TA249744
16-71