TM 5-5420-202-20-4
OPERATOR'S FLOOR ACCESS PLATE REPLACEMENT
(Sheet 1 of 1)
TOOLS:
Flat-tip screwdriver
SUPPLIES:
Gasket
PRELIMINARY PROCEDURE:
Remove operator's, seat (page 17-2, steps 1 through 3)
REMOVAL:
1.
Using screwdriver, remove six screws
(A).
2.
Remove plate (B) and gasket (C) from
hull floor. Throw away gasket.
INSTALLATION:
1.
Place new gasket (C) and plate (B) in
position on hull floor.
2.
Using screwdriver, install six screws
(A).
3.
Install operator's seat (page 17-3, steps
4 through 6).
End of Task