TM 5-5420-202-20-4
ENGINE LOWER ACCESS COVER REPLACEMENT (Sheet 1 of 2)
TOOLS: 9/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
Putty knife
Gasket
SUPPLIES:
Adhesive (Item 4, Appendix D)
Lockwashers (8 required)
PRELIMINARY PROCEDURE: Remove bulkhead p to ring (page 17-15).
REMOVAL:
Using socket, remove eight screws (A) and
1.
lockwashers (B) from holes (C).
Using socket and extension, remove six
2.
screws (D) lockwashers (E), and flat
washers (F).
Remove cover (G) and gasket (H).
3.
Using putty knife, scrape off all gasket
4.
and adhesive residue. Throw away gasket.
TA248544
Go on to Sheet 2