TM 5-5420-202-20-4
FIXED FIRE EXTINGUISHER MOUNTING BRACKET REPAIR (Sheet 1 of 1)
TOOLS: Needle nose pliers
PRELIMINARY PROCEDURE: Remove cylinders (page 20-52)
NOTE
Repair procedures for first short bracket
and second shot bracket are the same.
Second shot bracket is shown.
DISASSEMBLY:
1.
Using pliers, remove cotter pin (A) hold-
ing straight pin (B) in mounting bracket
(C).
2.
Using fingers, remove straight pin (B)
securing latch (D) to mounting bracket
(C).
3.
Remove latch (D) from mounting bracket
(C).
ASSEMBLY:
Place latch (D) in position on mounting
1.
bracket (C).
2.
Insert straight pin (B) through latch
(D) and mounting bracket (C).
Using pliers, install new cotter pin (A)
3.
through straight pin (B).
Install cylinders (page 20-54).
4.
End of Task
TA248720