TM 5-5420-202-20-4
SMOKE GRENADE DISCHARGER REPLACEMENT (Sheet 1 of 2)
TOOLS: 3/4 in. socket with 1/2 in. drive
6 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
Slip joint pliers, conduit style, with plastic jaw inserts
Torque wrench with 1/2 in. drive (0-175 lb-ft)
Locking compound (Item 15, Appendix D)
SUPPLIES:
Lockwashers (3 required)
REMOVAL:
WARNING
Make sure there are no smoke
grenades in dischargers. Acci-
dental firing of grenade could
hurt or kill you.
NOTE
Removal procedure is the same
for both the right and left dis-
chargers.
Using pliers, disconnect wiring harness
1.
connector (A) from receptacle on
back of discharger (B).
Using socket, extension, and ratchet,
2.
remove three screws (C) and washers (D)
securing discharger (B) to bracket (E).
Take discharger (B) off vehicle.
3.
Go on to Sheet 2
