TM 9-5420-202-34
HULL MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and
Equipment (MTOE) applicable to your unit.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
Special tools for direct support and general support maintenance are listed and illustrated in
TM 5-5420-202-24P which is the authority for requisitioning replacements.
ENGINE
1.
Engine and Transmission Sling
(12257229)
TRANSMISSION
Used with puller (item 3) to disengage trans-
Puller Adapter
2.
mission input shaft from engine flywheel.
(7082774)
Disengage transmission input shaft from engine
3.
Slide Hammer Puller
(7082201)
flywheel.
Lifting Sling
Lift transmission.
4.
(7081593)
5.
Pinion Turning Wrench
Turn transmission gearing.
(7081564)
FINAL DRIVE
6.
Box Wrench
Remove and install final drive output shaft nut.
(12251988)
7.
Bearing Removal Tool and Case Assy
(10933875)
and drive gear.
Seal Inserter
8.
Install final drive output shaft seal.
(8355822)
Change 2
2-1