TM 5-5420-202-34
POWER TAKEOFF REPLACEMENT (Sheet 3 of 8)
Wrap rags around two 45-degree
9.
elbows (H) on fuel pump (J)
to protect threads.
10.
Using pipe wrench, carefully remove
two 45-degree elbows (H) from
fuel pump (J).
11.
Using 1/2 inch wrench, remove
four nuts (K) and four washers
(L) that secure pump (J) to studs
(M) on power takeoff (E).
12.
Carefully remove pump (J) and
gasket (N) from power takeoff.
13.
Wrap rag around 45-degree
elbow (P) to protect threads.
14.
Using pipe wrench, carefully
remove elbow (P) from oil supply
inlet port of power takeoff
(E).
Go on to Sheet 4
3-8
