TM 5-5420-202-34
POWER TAKEOFF REPLACEMENT (Sheet 2 of 8)
REMOVAL:
1.
Using 7/8 inch wrench, disconnect
hose assembly (A) from fuel pump
(B).
2.
Using 7/8 inch wrench, disconnect
hose assembly (C) from fuel pump
(B).
3.
Using 9/16 inch wrench, disconnect
hose assembly (D) from external
oil supply inlet port of power takeoff
(E).
4.
Using 9/16 inch socket, remove
nut and washer (F) securing clamp
(G) that attaches hose assembly
(D) to power takeoff (E).
5.
Using 9/16 inch socket, remove
seven remaining nuts and washers
(F) that secure power takeoff
(E) to engine.
6.
Grasp power takeoff (E) with both
hands.
7.
Very carefully withdraw power
takeoff (E) from engine, rocking
gently as required to prevent binding.
8.
Place power takeoff (E) on bench
or other suitable work surface.
Go on to Sheet 3
3-7
