TM 5-5420-202-34
POWER TAKE-OFF GASKET REPLACEMENT (Sheet 2 of 2)
INSTALLATION
1.
Apply adhesive to surface (A) and surface
(B) of new gasket (C).
2.
Position new gasket (C) on access cover
(D) and flange (E) with holes alined.
Put twelve hole ring (F) in position with
3.
holes alined.
4.
Using 7/16 inch socket, install twelve
screws (G), and lockwashers (H).
5.
Put eight hole ring (J) in place.
6.
Using 7/16 inch socket and extension,
install eight new locknuts (K).
7.
Install universal joint (TM 5-5420-228-
24).
END OF TASK
